Ensemble-designs BrightEye Mitto Scan Converters User Manual download pdf (Page 32)

BrightEye Mitto Family - Page 32

Mitto Family of Scan Converters User Guide

www.ensembledesigns.com

Conﬁguration and Control

Control and operation of the BrightEye Mitto can be performed from the front panel, the BrightEye

Control application and through the RS-232/GPI port. Mitto’s front panel controls provide extensive

control for screen selection and most of the video and audio parameters. Some control settings and

parameter choices are available only with BrightEye Mac/PC software. These parameters cannot be

monitored from the front panel.

Adjusting Parameters from the Front Panel

The six buttons on the right side of the Mitto’s front panel are used to navigate the controls. If you are

familiar with our BrightEye products, you will notice that the Mitto has three additional buttons.

Prev and Next navigate through the various controls, such as Aspect and Position. When a control is

selected its LED blinks on and oﬀ. Arrows change values for the control you selected.

Pressing the Right Arrow or Left Arrow advances the selection within a given section of parameters,

or increases (Right Arrow) or decreases (Left Arrow) the value of a selected parameter.

Resetting to Default Values

Holding the Left Arrow and Right Arrow buttons at same time restores the selected control to its

default value. For example, with the Position control selected, pressing the Left Arrow and Right

Arrow buttons at the same time will cause the horizontal Position value to be restored to its default

value, which is all the way to the left side of the computer monitor. Similarly, with the Position control

still selected, holding the Up Arrow and Down Arrow buttons at the same time restores the vertical

Position to be restored to its default value, which is at the top of the computer monitor.

The front panel LED indicators light green when in their default values, and they light orange when

values other than the default are selected.

Press and Hold to Accelerate Movement Controls

The arrow buttons have a hold function. The behavior of pressing and holding an arrow button

depends on which control you have selected. For example, with the Position control selected, if you

press and hold the Right Arrow button, the screen selection will move at an increasing rate to the

right across the computer monitor.

BrightEye Mitto Front Panel, Model BEM-1

Note: Mitto Model BEM-1 is shown above. For variations on other Mitto models see the “Five BrightEye

Mitto Models” diagram on page 7 and “Speciﬁcations for BrightEye Mitto; Models BEM-1, BEM-1F,

BEM-2 and BEM-2F” on page 61 .

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 72 73

No comments

Ensemble-designs BrightEye Mitto Scan Converters User Manual Page 32